+44 (0) 1454 260596 | 9am-1pm (Mon-Fri)

James Tank Badges

James Tank Badges

James Tank Badges


James Tank BadgesOur domed James Tank Badges are inset into the rubber discs, screw holes pre drilled and ready to screw directly onto your tank. (Screws not supplied). They have a plain aluminium domed spacer between the badge and rubber which gives
added strength and ensure that the front of the badge is flush with the face of the rubber.

These are 2.375 inch dia with hole centres at 2.0625 inch.

We have endeavoured to make these as near to the original design as
practically possible. The originals were injection moulded with the back of
the badge in relief with the colours applied as a secondary process.


To produce these today in the same manner would be prohibitively expensive with regard to tooling and reverse printing costs. The originals being plastic tended to crack in the vicinity of the holes if the fixing screws were overtightened.

For More information contact us.