Gilera Piaggio 8774ST 130x26mm (Stencil Paintmask)

REF: 8774ST Category:



Gilera Piaggio Stencil which can be applied to the rear of the Gilera Piaggio Seat. Once adhered, you can use fabric paint and a brush to paint it on. Spray paint may work as well but best to test first.

Dimensions of Design are 130x26mm

Dimensions of the Stencil in total are 148x47mm

If seat covering is PVC, a multi surface water based paint should work, needless to say the stencil has to be removed when the paint is just touch dry but still soft.

Additional information

Weight 0.006 g
Dimensions 130 × 26 mm



Seat Back

Transfer Type

Stencil Paintmask


130 × 26 mm


Stencil Paintmask Instructions


Seat Back




About the Product

We only use the highest quality materials available to produce our transfers. Four figure reference numbers refer to our waterslide stock and four figure reference numbers suffixed with 'LC' refer to our higher performance grade (50 micron) vinyl transfers. We supply scrap vinyl 'LC' orders so that you can test your varnish/lacquer out. Please contact us if you wish for some waterslide scrap.

Returns Policy

If you wish to return your transfers you can send them back to us at: The Pin Mill, New Street, Charfield, GL12 8ES without delay and in any event not later than 14 days from the day on which you tell us you wish to return your order. The deadline is met as long as you post the items before the period of 14 days has expired as we recognise that sending your order back from countries such as the U.S.A and/or Australia etc.. can take weeks. You agree that you will have to bear the cost of returning goods. The transfers need to be in their original condition for us to accept refunds. Customers are only entitled to request a refund within 6 months of purchasing the goods.